4750 The Barcode dialog allows you to set 5 different regions in order to search for 5 different barcodes.\n
4751 The XPosition, YPosition, Imagewidth and Imagelength allow you to specify a region on the page.\n
4752 The scanner searches for a barcode within the specified region.
4753 You also need to specify which kind of barcode to search for.
4754 The scanner searches for only that particular kind of barcde.
4755 You can specify up to 5 different regions (with the corresponding barcode type) to search for per side of the page
4756 If the scanner is a duplex scanner, you can specify the same number of regions for the backside
4757 The Auto Read Front Side and Auto Read Back Side enable you to switch either side completely on or off.
4758 If the Enable Barcode checkbox is not checked, the scanner doesn't search for a barcode at all.
4760 Activating page size detection will ignore any information stored in the page size or area fields.\n\nThe Dither and Gamma buttons offer a file selection for downloading stored data to the scanner.
4761 Please select front main scan region to change Panasonic special features.
4762 Please select front main scan region to change Panasonic special features.
4763 Not enough DOS memory (GlobalDOSAlloc failed).
4764 Scanner lamp is bad.
4765 SCSI Parity error.
4766 The scanner's power was cycled. Try operation again.
4767 Internal hardware fault in scanner.
4768 External hardware fault in scanner.
4769 Aborted SCSI command (unspecified error).
4780 SCSI Parameter list length error.
4781 Invalid SCSI Command code.
4782 Invalid field in SCSI Command Descriptor Block (CDB).
4783 Unsupported Logical Unit Number (LUN).
4784 Invalid field in SCSI parameter block.
4785 SCSI Command Sequencing error.
4786 Too many windows defined.
4787 Invalid combination of dithers in windows and subwindows. Please see documentation or contact your vendor for valid combinations.
4788 Batch Abort error.
4789 Invalid bits in IDENTIFY message.
4790 This scanner does not support scanning images that large. Reduce resolution or image size and try again.
4791 This scanner can not scan duplex.
4797 The numbering unit cover is open.
4798 The lamp of the scanner is open.
4799 Paper is jammed in scanner
4800 Paper is jammed in scanner
4801 Paper is jammed in scanner
4802 Paper is jammed in scanner
4803 Deskew Error
4804 Minimum Media Error
4805 Media Length Error
4806 Double feed has occurred
4807 Barcode Error
4808 Endorsing Unit is not available
4809 Error in pointer position
4810 Endorser string is invalid
4811 Can not print Endorser because length of page being scanned is too short.
4814 The type of barcode chosen is not supported by this scanner.
4815 No Dither file has been downloaded to the scanner.
4900 None
4901 1 * 1 Matrix
4902 2 * 2 Matrix
4903 3 * 3 Matrix
4904 4 * 4 Matrix
4905 5 * 5 Matrix
4910 Auto mode 1
4911 Auto mode 2
4912 Auto mode 3
4920 Normal
4921 User Download 0
4922 User Download 1
4923 User Download 2
4924 User Download 3
4925 User Download 4
4926 Gamma for CRT
4930 No Gamma File has been downloaded to the scanner.
4931 None
4932 Detect and Scan Control Sheet, Continue Scanning
4935 Front #%d
4936 Back #%d
4940 Deskew Off
4941 Deskew Page
4942 Detect deskew parameters but don't deskew page
4945 Enabling the endorser will cause a string to be printed on every page.
4946 The text is printed on the backside of the page.
4947 The Endorser String Field specifies the text that is printed on the paper.
4948 TO PRINT AN INCREMENTING NUMBER:
4949 The first # character encountered in the string is replaced with the value specifed in the "Starting Number" field. Every successive # character is printed as a #.
4950 The starting number that replaces the # character is incremented a particular amount for every successive page. This amount is specified in the "Step Number"
4951 field. The number field always takes up 7 spaces.
4952 TO PRINT THE DATE:
4953 If a "%1d" or "%2d" or "%3d" or "%4d" is encountered in the string, it is replaced with the current date. The format in which the date is printed is determined by the number after the % sign:
4955 For example: %4d will be replaced with 21 Dec., 1997
4956 TO PRINT THE TIME:
4957 If a "%1t" or "%2t" is encountered, it is replaced with the current time. The format in which the time is printed is determined by the number after the % sign:
4958 %1t: HH:MM\n%2t: HH:MM:SS
4959 Note: In order to print a % sign, use two % characters.
4960 VERTICAL OFFSET\nThe "Printing Offset" field's value determines the distance from the top of the page where the string is printed. A value of 1 is equivalent to 2.40 mm. An offset of 10mm is always added to the value.
4961 For example, a value of 5 = 10mm + 5 * 2.40mm = 22mm
4962 EXAMPLE:\n If the String field is "Bio Exam # - %3d, LSR University"\nStart field is 3\nStep field is 2
4963 String printed on the back of Page 1: "Bio Exam 3 - 12/21/97, LSR University"
4964 String printed on the back of Page 2: "Bio Exam 5 - 12/21/97, LSR University" and so on.
